1981 - 1990 of 3079
yokogawa rtd input module
Selling leads
|
... monitored by the re-readable input. If the output status is wrong, an overall error message is generated for the involved output group. The error ...
2024-12-09 12:02:38
|
|
... The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If the counter is used and therefore ...
2024-12-09 12:04:32
|
|
... inputs, but with the following exception:Caused by the direct electrical connection with theoutput, the varistor for demagnetization of inductive ...
2024-12-09 12:04:32
|
|
...n disconnectinginductive loads (see figure). This is why the difference between UPx and the input signal may not exceed the clamp voltage of the ...
2024-12-09 12:04:32
|
|
...the input when disconnectinginductive loads (see figure). This is why the difference between UPx and the input signal may not exceed the clamp ...
2024-12-09 12:04:32
|
|
... if UP5 = 24 V, the input signal voltage must be between -12 V and +30 V. If UP5 = 30 V, the input voltage has to be within -6 V and +30 V.If all ...
2024-12-09 12:04:32
|
|
...: Terminal 2 (E62,00): Counting input Terminal 46 (A62,00): Output ”End value reached” Enabling of the counting input and of the output ”End value ...
2024-12-09 12:04:32
|
|
... The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If the counter is used and therefore ...
2024-12-09 12:04:32
|
|
... The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If thecounter is used and therefore ...
2024-12-09 12:04:32
|
|
... counter The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If thecounter is used and ...
2024-12-09 12:04:32
|