31 - 40 of 71
standard dynamic measurement mdl
Selling leads
|
...position monitoring in industrial machinery. This system is widely used in applications such as fluid-film bearing machines, providing both static ...
2025-08-11 00:13:11
|
|
...-contact measurement of vibration and shaft position in industrial machinery.The system provides an output voltage directly proportional to the ...
2025-09-29 00:16:29
|
|
... of shaft vibration and position in rotating machinery.It is capable of both static (position) and dynamic (vibration) measurements. 330101-00-77...
2025-09-29 00:16:29
|
|
... directly proportional to the distance between the probe tip and a conductive surface. It’s capable of both static (position) and dynamic ...
2025-09-29 00:16:29
|
|
... system provides an output voltage that is directly proportional to the distance (gap) between the probe tip and a conductive surface. It can ...
2025-11-14 01:12:14
|
|
... to the datasheet for the 3300 XL 8 mm system:“The system provides an output voltage that is directly proportional to the distance between the ...
2025-11-14 01:12:14
|
|
...Standard 5 metre system: 7.87 V/mm (200 mV/mil) ±5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 80 ...
2025-08-12 19:07:08
|
|
...displacement measurements in industrial machinery. This specific 11 mm probe is engineered for applications requiring longer linear measurement ...
2025-07-29 18:59:18
|
|
... vibration and position in rotating machinery. This model features an 11 mm probe tip, which offers a longer linear range compared to the standard ...
2025-08-19 00:21:19
|
|
... technology to provide output voltage proportional to the distance between the probe tip and a conductive surface, enabling accurate monitoring of ...
2025-07-01 20:11:51
|