71 - 80 of 110
s9361dh 00 terminal board module
Selling leads
|
... sign for voltage and 12 bits without sign for current. The ranges 0...5 V und ±5 V are converted with 10 bits plus sign.the output A 62,00 is only ...
2024-12-09 12:04:32
|
|
... is centrally positioned between upper and lower edges of the module. Mounting with screws by 4 screws M4 Width x height x depth 120 x 140 x 85 mm ...
2024-12-09 12:04:32
|
|
3500/42-09-00 Bently Nevada Proximitor Seismic Monitor Product Highlights ◆ I/O Module Type : 09 = Prox/Velom I/O Module with internal terminations, ...
2024-12-09 17:20:24
|
|
...00 = None ◆ Dimensions (Height x Width x Depth) : 24.13 cm x 2.44 cm x 24.18 cm ◆ Estimated delivery even 2-4 days ◆ ...
2024-12-09 17:20:24
|
|
... signals at tracks A and B in case of connection of incremental position sensors are counted.The maximum counting frequency is 50 kHz.The counter ...
2024-12-09 12:04:32
|
|
...-isolated (e.g. the minus terminal is remotely earthed). Since the earthing potential is not exactly the same as AGND1, it has to be measured ...
2024-12-09 12:04:32
|
|
... to the Pt100 sensors in the same cable. The cores must have the same cross section. Per channel, a twisted pair is used (for the two terminals of ...
2024-12-09 12:04:32
|
|
... on a output group.The overload is displayed by the red LED Ovl. and via error flags in the PLC.The other core of the bus line is looped through ...
2024-12-09 12:04:32
|
|
... signal voltage must be between -12 V and +30 V. If UP5 = 30 V, the input voltage has to be within -6 V and +30 V.If all of the 8 channels of the ...
2024-12-09 12:04:32
|
|
...Module DSTA131 57120001-CV ABB DSTA131 57120001-CV DSTA 131 CIRCUIT BOARD DSTA affordable price Product Description: In order to avoid measurement ...
2024-12-09 12:04:32
|