1091 - 1100 of 1180
ge input terminal board
Selling leads
|
...UP5 terminal is left unconnected, no restrictions exist for the inputs. The input signal voltages then may be within -30 V and +30 V. There is no ...
2024-12-09 12:04:32
|
|
... is left unconnected, no restrictions exist for the inputs. The input signal voltages then may be within -30 V and +30 V. There is no restriction ...
2024-12-09 12:04:32
|
|
...input/output handshake circuit allows the input/output data to be in synchronization with an external circuit. ・Supports reset signal output and ...
2024-12-09 13:49:30
|
|
....2cm x 4.0cm Weight 0.4kg Product Details To allow best possible cooling, the proper mounting position has to be unconditionally observed taking ...
2024-12-09 13:05:45
|
|
... The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If the counter is used and therefore ...
2024-12-09 12:04:32
|
|
... The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If thecounter is used and therefore ...
2024-12-09 12:04:32
|
|
... counter The two inputs E 62,00 and E 62,01 can be assigned to the internal high-speed counter by configuration. If thecounter is used and ...
2024-12-09 12:04:32
|
|
... chassis slots of the SLC 500 Chassis and uses a removable terminal block (RTB). It has a sinking operational voltage range between 10 and 30V DC ...
2024-12-09 12:55:48
|
|
...Input Module functions as a 16-channel dc voltage monitor or 16-channel contact sensor.Each channel accepts a 2-wire input from a dc voltage source ...
2024-12-09 23:21:53
|
|
... is available. Edge-triggered means that the set function is effective only on the signal edge and not during the time the signal is high. The ...
2024-12-09 12:04:32
|