361 - 370 of 376
emergency turbine protection module
Selling leads
|
... 31C150-503-4-00 8263094 Module, Line Interface, 400VAC, 25A, 230VAC, 24VDC at 20A, Module, Line Interface, 400 Volt AC, 25 Amp at 230 Volt AC, ...
2024-12-09 12:38:49
|
|
...ails: The Schneider Electric / Modicon 140CPS11420 is a power supply module in the Quantum automationplatform. It can use a summable or standalone ...
2024-12-09 12:55:48
|
|
... Electric / Modicon 140CPS11420 is a power supply module in the Quantum automationplatform. It can use a summable or standalone power supply type. ...
2024-12-09 12:55:48
|
|
...module designed for use within the Bently Nevada 3500 machinery protection system. It converts incoming AC power to a regulated DC voltage that ...
2025-07-01 20:12:22
|
|
...Proximitor/Seismic Monitor (128229-01) is a four-channel monitoring module designed to enhance machinery protection and reliability. Part of the ...
2024-12-10 00:19:35
|
|
... critical data about the vibration, position, and displacement of rotating machinery in industrial environments. The Proximitor Monitor plays a ...
2024-12-10 00:19:35
|
|
...500 mA, no short-circuit protection. Circuits are electrically connected in the voltage range from 5 to 32 VDC. The 32 outputs are divided into 4 ...
2024-12-09 12:22:52
|
|
... Power Supplies accept a wide range of input voltages and converts them to voltages acceptable for use by other 3500 modules. Three Power Supply ...
2024-12-09 12:39:55
|
|
... at 24V DC, max.excluding digital outputs and DRIVE-CLiQ supply 0.35A for CU310 DP+0.5A for PM340 Power Module Conductor cross-section, max.2.5mm2 ...
2024-12-09 13:01:55
|
|
.... ◆ Three Power Supply versions are available with the 3500 Series Machinery Protection System as follows: 1. ac Power Supply, 2. High Voltage dc ...
2024-12-09 17:20:24
|