601 - 610 of 643
ds200ucpbg5afb ge terminal board
Selling leads
|
... the board is a termination point for current sensors and bridge attenuators and also functions as an isolator for signals between the high-voltage ...
2024-12-09 22:39:23
|
|
... component that is used in the Mark VI Series. ◆ This board has been designed to fit into a rack system to support multiple boards. There are ...
2024-12-09 17:22:47
|
|
...built with two jack inputs/outputs. The IS200EGPAG1BEC is a GE PCB component created for the Mark VI series.The Mark VI is one of the last of the ...
2024-12-09 22:39:23
|
|
...board component made as part of the Mark VI series. The Mark VI is one of several Speedtronic systems made by GE used for the management of gas and ...
2024-12-09 17:22:47
|
|
... VI VME Communication board. The VCMI board in the control and interface module communicates internally to the I/O boards in its rack, and to the ...
2024-12-09 22:39:23
|
|
...GE drive control Systems.The Mark V is used to control and protect the unit, along with sensors and devices mounted on the unit and its auxiliaries...
2024-12-09 19:05:45
|
|
..., 4 to 20mA (default) or 0 to 20 mA. ◇ The module is equipped with two range jumpers, one for the first and second channels and the other for the ...
2024-12-09 17:20:24
|
|
..., 4 to 20mA (default) or 0 to 20 mA. ◇ The module is equipped with two range jumpers, one for the first and second channels and the other for the ...
2024-12-09 17:20:24
|
|
... module provides 16 input points in 1 group with a common power input terminal. It has discrete input and no backplane restrictions. ◇ This input ...
2024-12-09 17:20:24
|
|
... in 2 groups with each group having a common output power terminal. LEDs which indicate on the off status of the output points are available on the ...
2024-12-09 22:39:23
|