141 - 150 of 228
backup protection terminal board
Selling leads
|
... output signal at the terminal 46 (A 62,00) for the high-speed counter The output A 62,00 can be assigned to the internal highspeed counter by ...
2024-12-09 12:04:32
|
|
... to the Pt100 sensors in the same cable. The cores must have the same cross section. Per channel, a twisted pair is used (for the two terminals of ...
2024-12-09 12:04:32
|
|
... on a output group.The overload is displayed by the red LED Ovl. and via error flags in the PLC.The other core of the bus line is looped through ...
2024-12-09 12:04:32
|
|
... signal voltage must be between -12 V and +30 V. If UP5 = 30 V, the input voltage has to be within -6 V and +30 V.If all of the 8 channels of the ...
2024-12-09 12:04:32
|
|
...BOARD DSTA affordable price Product Description: In order to avoid measurement errors, it is absolutely necessary,to lead the cores to the Pt100 ...
2024-12-09 12:04:32
|
|
...Board DHL FREE Product Description: Features of the digital inputs/outputs:The 8 digital inputs/outputs are arranged in one group. The group as a ...
2024-12-09 12:04:32
|
|
...-isolated (e.g. the minus terminal is remotely earthed). Since the earthing potential is not exactly the same as AGND1, it has to be measured ...
2024-12-09 12:04:32
|
|
...BOARD SUBMODULE Super quality products Product Description: Features of the digital inputs/outputs:The 8 digital inputs/outputs are arranged in one ...
2024-12-09 12:04:32
|
|
... cable. The cores must have the same cross section. Per channel, a twisted pair is used (for the two terminals of the Pt100 sensors) plus a single ...
2024-12-09 12:04:32
|
|
...-isolated (e.g. the minus terminal is remotely earthed). Since the earthing potential is not exactly the same as AGND1, it has to be measured ...
2024-12-09 12:04:32
|