561 - 570 of 5602
abb input slave module
Selling leads
|
...the input when disconnectinginductive loads (see figure). This is why the difference between UPx and the input signal may not exceed the clamp ...
2024-12-09 12:04:32
|
|
... mA (each channel can be configured individually)Configurability oper. mode "8 bits" 0...10 V, 0...20 mA (channels can be configured in pairs...
2024-12-09 12:04:32
|
|
..., the addresses for inputs are not needed.Note:Module 07 DC 92 reads the setting of the address switch only during initialization, after switching ...
2024-12-09 12:04:32
|
|
ABB Module DO810 3BSE008510R1 ABB DO810 Digital Output module reputation based Product Description: Differential inputs are very useful, if analog ...
2024-12-09 12:04:32
|
|
ABB Module DPW02 ABB DPW02 DPW02 Digital Output module Product Description: Differential inputs are very useful, if analog sensors are used which are ...
2024-12-09 12:04:32
|
|
... by the re-readable input. If the output status is wrong, an overall error message is generated for the involved output group. The error is ...
2024-12-09 12:04:32
|
|
... modules in KW 00,09. The user program starts only, i.e. it handles process inputs and outputs only, if at least n remote modules have been adopted ...
2024-12-09 12:04:32
|
|
.... The user program starts only, i.e. it handles process inputs and outputs only, if at least n remote modules have been adopted into the CS31 ...
2024-12-09 12:04:32
|
|
... as long as it is present. In the PLC system an error message is stored (FK4, error number 9). In order to avoid error messages with unused analog ...
2024-12-09 12:04:32
|
|
... as long as it is present. In the PLC system an error message is stored (FK4, error number 9). In order to avoid error messages with unused analog ...
2024-12-09 12:04:32
|