VIBRODAU 4000 PS-410 SCHENCK VIBROCONTROL 4000

VIBRODAU 4000 PS-410 SCHENCK VIBROCONTROL 4000

Product Details

High capability, high flexibility and simple adaptation to different monitoring tasks.

Software configuration of the monitoring modules with a palmtop, laptop, notebook or PC.

Reduced number of components as compared to analogue monitoring systems. This increases the MTBF time ("mean time before failure") and increases the operating security.

Direct communications compatibility with host process control systems via standardized data-bus interfaces (Profibus and Modbus).

Apart from the conventional limit value monitoring, trend monitoring to recognize rapid measurement value changes (e.g. turbine blade breakage) is available.

2 channel design for all monitoring modules with 4 software allocated limit value relays and an additional OK relay.

Additional protection measures to suppress external interference of the monitoring modules. Apart from the OK fault recognition, the alarm response delay, the trip multiplier, the power supply failure bridging and the power-on protective switch, the VIBROCONTROL 4000 firstly performs a watchdog function to determine the cyclic operation of the firmware, the memory resident storage of all parameters/settings and the automatic RAM and ROM tests.

About SCHENCK

Nearly anything that rotates, or is supported in bearings that allow it to rotate, needs balancing to insure quality performance. From the smallest rotors for dental drill instruments to large power generating turbines, and from electric motor armatures to the largest jet engines, all require sound balancing techniques for reliable, cost-effective operation. Schenck Balancing Machines offer state of the art balancing technologies, with superior operator interface Instrumentation and Industry recognized reliability and connectivity. Balancing since 1908.

The Balancing and Diagnostic Systems Group in the US operates under Schenck USA Corp. as a subsidiary of Schenck Corp. (SCO), Deer Park, NY. Schenck USA Corp. operates with three locations: Deer Park, NY; Southfield, MI, and Hudson, MA. Incorporated in the state of New York, SCO's parent company is Schenck RoTec GmbH, Darmstadt, Germany, the world’s largest manufacturer of dynamic balancing machines and balancing equipment, which in turn is wholly owned by Dürr AG of Bietigheim, Germany.

More Products  

Contact Us

miya@mvme.cn(Click)

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng52