NFC Card Reader QR Code 120MHz RS485 2D Barcode Scanner

RD300 NFC Access Control Card Reader 2D Barcode QR Code Scanner

Barcode QR Code Scanner Functions
A.Burning program
After power is off, press button 1; turn on power and it will enter burning program interface
B.Burning voice file
After the machine is working normally, pressing button 1 for a long time, and it will enter into voice file burning interface
C.Inquiry
After the machine is working normally, press the button 2 for a short time, you can inquire the POS info, transaction records etc.
D.Rate, driver card and ticket seller card
After the machine is working normally, press the button 3 for a long time and then you can set the rate, read the driver or ticket seller card.
(Note: the functions of three buttons can be customized)

Product Parameters

RD300 Bus Machine Manual.pdf

User Notice
A.Operate with care;
B.Do not touch power cable when your hands are wet;
C.Do not plug out the power cable brutally;
D.Do not use damaged or loosen power cable and power outlet;
E.Do not drag the antenna

Maintenance
Toubleshooting
Can not scan the card successfully: turn off the machine and turn on again; try to scan the employee card. If not solved, contact the manufacturer;
Successful scanning but no beep: contact manufacturer for repair;
Scan not scan the 2D code: bring the 2D code closer to the scan window.