11 - 20 of 78
unjointed test finger
Selling leads
UL 1278 Figure 10.1 Cone Test Finger Probe for Heating Elements Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. ...
2025-06-20 20:20:26
|
Rigid Finger 1 Ø50mm, 20mm wide, 100mm long
2025-06-20 20:20:12
|
Test Rubber Ball Usage rubber ball used for dynamic stability testing to UL (USA) standards. A ball, 2 and 3/4/16 inch diameter (2.187 inches), filled ...
2025-06-20 20:20:15
|
Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate ...
2025-06-20 20:20:23
|
Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA ...
2025-06-20 20:20:15
|
UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center ...
2025-06-20 20:20:25
|
IT Test Probe Ø12mm, 80mm long with tip radius 6mm Conforms to IEC60950, GB4943
2025-06-20 20:20:12
|
IEC 60529 Test rod 2.5mm, IP3X Usage This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2025-06-20 20:20:14
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to ...
2025-06-20 20:20:14
|
Test Needle Diameter : Ø0.5mm or Ø1mm, Length : 20mm
2025-06-20 20:20:14
|