1 - 10 of 24
ul 749 fig3 test finger probe
Selling leads
|
... – Probes for verification Applications: To verify protection of persons against access to hazardous live parts or hazardous mechanical parts To ...
2025-06-20 20:20:05
|
|
... probe is made of stainless steel. Standard:UL1278 Fig 10.1. Application:The heating element and any part of the element assembly (such as an ...
2025-06-20 20:20:26
|
|
UL Standard Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending ...
2025-06-20 20:20:24
|
|
UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center ...
2025-06-20 20:20:25
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that ...
2025-06-20 20:20:15
|
|
UL Enamel Wire Probe 25 Usage: This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with ...
2025-06-20 20:20:15
|
|
Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA ...
2025-06-20 20:20:15
|
|
Test Rubber Ball Usage rubber ball used for dynamic stability testing to UL (USA) standards. A ball, 2 and 3/4/16 inch diameter (2.187 inches), filled ...
2025-06-20 20:20:15
|
|
... 16.2, UL6500 Fig14, UL60065 Fig14 and UL60950 Fig NAF.1. Palm simulator and restricted joint movement simulates human finger movement. It is
2025-06-20 20:20:16
|
|
UL Articulated Finger Probe The UL Articulated Finger Probe is a standard articulated finger as required by Underwriters Laboratories in many of their ...
2025-06-20 20:20:12
|