241 - 250 of 689
non combustibility test equipment
Selling leads
|
... of the female taper of 10,5 mm is required for testing non-interconnectable characteristics. A minimum length of the female taper of 7,5 mm may be ...
2025-07-31 00:07:00
|
|
IEC245-4 Cable Testing Equipment Rubber Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of ...
2024-12-09 17:19:27
|
|
...test device Overview This device complies with the requirements of Clause 22.16 of IEC60335-1:22.16 and GB4706.1. It is the structure for detecting ...
2024-12-09 18:11:00
|
|
... same as the original bolt that connects the down rod to the motor b diameter 50 % “a” Kingpo Technology Development Limited is a pioneer and ...
2024-12-09 19:03:30
|
|
... device testing equipment enables accurate evaluation of axial load separation resistance and override resistance in luer lock connections, ...
2025-07-26 00:13:26
|
|
...separation from unscrewing, stress cracking and non-interconnectable characteristics ISO 80369-7 FIGURE C.2 MALE REFERENCE LUER SLIP CONNECTOR ISO ...
2025-06-20 20:17:06
|
|
...ch confirms to many standards such as IEC60669, IEC60884 and so on. This compliance is used for judging whether the design and the structure of the ...
2024-12-09 18:31:40
|
ISO 80369-7 Figure C.2 Male Reference Luer Slip Connector For Testing Female Luer Connectors Leakage
|
... 0,5 mm (maximum) × 45° chamfer. The minimum length of the male taper of 10,5 mm is required for testing non-interconnectable characteristics. A ...
2025-06-20 20:17:07
|
|
... connector for testing male luer connectors for leakage, separation from unscrewing, stress cracking and non-interconnectable characteristics. Our ...
2025-07-26 00:13:26
|
|
... 0,5 mm (maximum) × 45° chamfer. The minimum length of the male taper of 10,5 mm is required for testing non-interconnectable characteristics. A ...
2025-07-26 00:13:26
|