151 - 160 of 175
needle flame test apparatus
Selling leads
|
BS1363-2:1995 Figure 33 | Apparatus For Torsion Test On Pins
2026-08-03 16:26:02
|
|
BS1363-1:1995 Figure 2a|Apparatus For Mechanical Strength Test On Resilient Covers
2026-08-03 16:26:08
|
|
BS1363-2:1995 Figure 32 | Apparatus For Tests On Adaptor Pins
2026-08-03 16:26:13
|
|
IEC60065 Figure 11 Plug Torque Test Apparatus Product information: This plug torque tester conforms to the standard of IEC60065 figure 11. It is used ...
2026-08-03 16:23:45
|
|
1, Applicable industries This standard specifies the measurement of combustion performance of non-metallic materials in civil aircraft cabin and ...
2026-07-14 12:11:19
|
|
... and withdraw testing. This apparatus can work together with a load machine to perform load test. You can form a closed-loop load power test system ...
2026-08-03 16:25:22
|
|
... for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate provided with holes suitable for the pins of the ...
2026-08-03 16:27:23
|
|
Product introduction: 1.It confirms to IEC60950 A.5 2.It is used to detect the protective performance of fire enclosure equipment.. 3. A sample of the ...
2026-08-03 16:25:27
|
|
... of moisture loss- HME 6.2 Measurement of moisture loss 6.2.1 Principle The performance of an HME shall be measured by recording the mass of water ...
2026-08-08 00:21:26
|
|
... of plug pins, in according to IEC 60884 1 figure 40,This test apparatus consists of an insulating plate A and of a metal part B: between these two ...
2026-08-03 16:24:05
|