881 - 890 of 909
medical test impactor equipment
Selling leads
|
Switching Intelligent DC Power Source APD2000 Series Product parameter • Input voltage range:1Ø2W+G 110V/220V±10% 220V±10% 3Ø4W+G 220V/380V±10% • CV...
2026-08-03 16:27:11
|
|
IEC60990-Figure 3, 4, 5 Measurements of Prospective Touch Voltage Touch Current and Protective Conductor Current Standard: IEC60990-Figure 3, 4, 5
2025-09-04 18:17:15
|
|
IEC 62196-1 Charge gun / Electric Vehicle Plug And Connector Breaking Capacity Tester Product information: The test equipment is used to verify ...
2026-08-03 16:23:28
|
|
Surface Temperature Measuring Probe with Omega insulated thermocouple wire Standard: IEC 60335-2-9,IEC 60335-2-14 Parameters: Key A adhesive B ...
2026-08-03 16:23:29
|
|
Tube for illuminance measurement -IEC 60601-2-41-Figure 201.111 Standard:IEC 60601-2-41-Figure 201.111 Remaining illuminance with tube A tube with a ...
2026-08-03 16:24:04
|
|
IEC 62368-1 Annex G.8.2.2 Resistor loading box 1. IEC 62368-1, Annex G.8.2.2 2. Resistance: 3840ohm(60W), 1920ohm(120W),960ohm(240W),480ohm(480W)...
2025-09-04 18:20:49
|
|
KP-1980S Combination Wave Pulse Generator: High Voltage Impulse Tester Product Overview The KP-1950S Combination Wave Pulse Generator is a state-of...
2026-08-03 16:25:14
|
|
IEC 60335-2-3 Simulated Hand,Feeler Gauge IEC 60335-2-3-Figure 102 Simulated hand and Figure 103 Feeler gauge 22.1 3 Replacement: 1 3 Appliances shall ...
2026-08-03 16:25:28
|
|
IEC 60851-3 Mandrel winding tester Product Description Standard:IEC 60851-3-clause 5.1.1 The tension to be applied to the wire during winding on the ...
2026-08-03 16:23:59
|
|
10mΩ Battery Short Tester, IEC 60335-1-Annex B Standard It is conforms to IEC 60335-1-Annex B (Shorting means with a resistance not to exceed 10 mΩ ± ...
2026-08-08 00:21:25
|