1 - 10 of 167
medical moisture exchange equipment
Selling leads
|
... of moisture loss- HME 6.2 Measurement of moisture loss 6.2.1 Principle The performance of an HME shall be measured by recording the mass of water ...
2026-08-08 00:21:26
|
|
ISO 9360-1 Anaesthetic and respiratory equipment –Heat and moisture exchangers (HMEs) for humidifying respired gases in humans –Part 1: HMEs for use ...
2026-08-08 00:21:26
|
|
ISO 9360-1 Humidity and Moisture Exchange Test System with Wireless Connectivity Technical Specifications Cavity Diameter 56mm Reservoir Bag 2L ...
2026-08-03 16:26:48
|
|
Cone tool | medical bed standard equipment It is designed according to the standard iec60601-2-52 figure 201.103a. It is made of aluminum and weighs 5...
2026-07-14 12:11:28
|
|
Medical Test Equipment ISO 9360-1 Anaesthetic and respiratory equipment –Heat and moisture exchangers (HMEs) for humidifying respired gases in humans ...
2026-08-08 00:21:26
|
|
...equipment is developed and designed according to ISO 9360-1 and ISO 23328-1. This equipment is mainly used to test the performance of the heat and ...
2026-08-08 00:21:26
|
|
... test data. GB 19083-2003-2011 GB/T 4745 requirements. Characteristics of the equipment 1. Configure funnel for detection. 2. The height can be ...
2026-08-03 16:27:33
|
|
ISO 80369-20 Medical Small Bore Connector Test Equipment The Connector Assembly Device is the core piece of equipment required for all of the ISO ...
2026-08-03 16:25:06
|
|
... of the side rails of Medical hospital beds in accordance with IEC 60601-2-52 "Medical electrical equipment - Part 2-52: Particular requirements ...
2026-08-03 16:24:31
|
|
...Medical Face Masks Product Overview The Synthetic Blood Penetration Tester is designed to test whether medical face masks can resist the splash of ...
2026-08-03 16:25:05
|