1 - 10 of 197
lamp cap gauge tester
Selling leads
|
...Lamp cap gauge | "GO" Gauge For E27 Caps on Finished Lamps | 7006-27B-1 Purpose: to check the maximum dimensions of screw thread and ...
2025-09-04 18:15:23
|
|
...Lamp cap gauge | go gauge for dimension "S1" of E27 caps on finished lamps | 7006-27C-1 Purpose: to check the dimensions S1 minimum and ...
2025-09-04 18:15:35
|
|
...ing insertion of caps E27 on finised lamps. LED Lamp Cap Gauge Series: IEC60061-3, 7006-27B-1 "Go"gauges for E40 and E27 caps on finished ...
2025-09-04 18:15:35
|
|
... E27 caps on finished lamps shown on 7004-21. LED Lamp Cap Gauge Series: IEC60061-3, 7006-27B-1 "Go"gauges for E40 and E27 caps on ...
2025-09-04 18:15:41
|
|
...GX53 Lamp cap gauge 7006-142D-1 not go gauge for caps GX53 IEC60061-3 GX53 Lamp cap gauge 7006-142E-1 go and not go gauge for checking keyways in ...
2025-09-04 18:15:22
|
|
...Lamp cap gauge | Gauge For Caps on Finished Lamps for Testing Protection Against Accidental Contact E27 | 7006-51-2 Purpose: to check protection ...
2025-09-04 18:15:36
|
|
.... Testing: when the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond ...
2025-09-04 18:15:34
|
|
...: when the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surgace W shall be co-planar with or project ...
2025-09-04 18:15:34
|
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2026-08-03 16:26:41
|
|
...lamp cap gauge | Gauge for finished lamps fitted with E14 caps for testing contact making | 7006-54-2 Purpose: to check lamp dimensions for contact ...
2025-09-04 18:15:34
|