881 - 890 of 910
iso 80369 test equipment
Selling leads
|
IEC 60601-1 304 Steel Obstruction Rectangular Cross Section IEC 60601-1 304 steel Obstruction a solid vertical plane obstruction with a rectangular ...
2025-09-04 18:22:25
|
|
IEC 60335-2-3 Simulated Hand,Feeler Gauge IEC 60335-2-3-Figure 102 Simulated hand and Figure 103 Feeler gauge 22.1 3 Replacement: 1 3 Appliances shall ...
2026-08-03 16:25:28
|
|
IEC 60851-3 Mandrel winding tester Product Description Standard:IEC 60851-3-clause 5.1.1 The tension to be applied to the wire during winding on the ...
2026-08-03 16:23:59
|
|
10mΩ Battery Short Tester, IEC 60335-1-Annex B Standard It is conforms to IEC 60335-1-Annex B (Shorting means with a resistance not to exceed 10 mΩ ± ...
2026-08-08 00:21:25
|
|
IEC 62368-1 Annex G.8.2.2 Varistor Overload Tester 1. IEC 62368-1, Annex G.8.2.2 2.Voltage Vr: 240V, 2Vr:480V, resistance accuracy ±3% R1 (16*Vr) : 16...
2026-08-03 16:24:25
|
|
IEC 60601-1-clause.8.11.3.6 / IEC 62368-AnnexG.7.5 Cord guards / Non-detachable cord bend protection tester Technical Parameters: Applied standards ...
2025-09-04 18:20:53
|
|
IEC 60335-2-6 Spillage solution bottle Figure 106 – Detail of bottle cap and position of hole Figure 107 – Spillage solution bottle
2026-08-03 16:22:38
|
|
IEC 60335-1 Resistive-capacitive low pass filter with a -3 dB roll off frequency of 5 kHz ± 0,5 kHz
2026-08-03 16:22:38
|
|
IEEE Std C57.12.28 Pry bar
2026-08-03 16:22:39
|
|
ASTM F2554 22 Phantom
2026-08-03 16:24:26
|