31 - 40 of 225
iec 62368 it test equipment
Selling leads
|
... N ± 10 N over a circular plane surface 30 mm in diameter for a short time duration of approximately 5 s, applied in turn to the top, bottom, and ...
2025-06-20 20:19:59
|
|
...IEC 62368 -1-Figure V.1 Heat-treated steel Steel Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is ...
2025-06-20 20:19:54
|
|
Gasket test-IEC 62368-1-Figure Y.1 | Compression test Following the test specified in b), the same specimens shall be cooled for a period of 24 h to ...
2025-06-20 20:19:09
|
|
IEC 62368-1 Annex C ISO 179 Charpy impact tester , ISO 180 Izod impact Tester Product Introduction Digital Charpy/Izod Impact Tester is used to test ...
2025-07-06 00:17:06
|
|
Jointed test probe for equipment likely to be accessible to children Reference Standard: IEC62368-1-Figure V.1 Specification: Test Finger Length:234mm ...
2025-06-20 20:19:06
|
|
Wedge probe , IEC 62368-1 Figure V.4 – Wedge probe According to standard: IEC62368-1 Material :heat-treated steel Length :300mm Width :50mm Bendable ...
2025-06-20 20:20:07
|
|
Three vertical bar signal’ shall be used as defined in 3.2.1.3 of IEC 60107-1:1997 3.2.1 .3 Three vertical bar signal The three vertical bar signal ...
2025-06-20 20:18:58
|
|
9.6.3 Test method and compliance criteria The wireless power transmitter is placed in a room under the temperature conditions as specified in 9.3.2. ...
2025-06-20 20:18:37
|
|
... the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand. 2 ...
2025-07-16 00:06:12
|
|
...Testing Equipment . List Of Equipment In Compliance With IEC 60529 IEC 60529 Test Equipment . List Of Equipment In Compliance With IEC 60529 No. ...
2025-07-16 00:06:12
|