281 - 290 of 380
iec 60529 ip testing equipment
Selling leads
|
IEC 60335-2-25, 6th Edition (2010) - A1/2014 - A2/2015 Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for ...
2026-08-03 16:24:44
|
|
Three vertical bar signal’ shall be used as defined in 3.2.1.3 of IEC 60107-1:1997 3.2.1 .3 Three vertical bar signal The three vertical bar signal ...
2026-07-14 12:12:05
|
|
IEC 60598-1 Annex K Temperature measurement- Double-walled cylinder Conform to IEC 60598-1 Annex K.1 The average ambient temperature in the draught...
2026-07-14 12:11:11
|
|
Tube for illuminance measurement -IEC 60601-2-41-Figure 201.111 Standard:IEC 60601-2-41-Figure 201.111 Remaining illuminance with tube A tube with a ...
2026-08-03 16:24:04
|
|
IEC 62368-1 Annex G.8.2.2 Resistor loading box 1. IEC 62368-1, Annex G.8.2.2 2. Resistance: 3840ohm(60W), 1920ohm(120W),960ohm(240W),480ohm(480W)...
2025-09-04 18:20:49
|
|
IEC 60601-1 304 Steel Obstruction Rectangular Cross Section IEC 60601-1 304 steel Obstruction a solid vertical plane obstruction with a rectangular ...
2025-09-04 18:22:25
|
|
IEC 60335-2-3 Simulated Hand,Feeler Gauge IEC 60335-2-3-Figure 102 Simulated hand and Figure 103 Feeler gauge 22.1 3 Replacement: 1 3 Appliances shall ...
2026-08-03 16:25:28
|
|
IEC 60851-3 Mandrel winding tester Product Description Standard:IEC 60851-3-clause 5.1.1 The tension to be applied to the wire during winding on the ...
2026-08-03 16:23:59
|
|
10mΩ Battery Short Tester, IEC 60335-1-Annex B Standard It is conforms to IEC 60335-1-Annex B (Shorting means with a resistance not to exceed 10 mΩ ± ...
2026-08-08 00:21:25
|
|
IEC 62368-1 Annex G.8.2.2 Varistor Overload Tester 1. IEC 62368-1, Annex G.8.2.2 2.Voltage Vr: 240V, 2Vr:480V, resistance accuracy ±3% R1 (16*Vr) : 16...
2026-08-03 16:24:25
|