51 - 60 of 142
iec62368 pulse test generator
Selling leads
|
Reel Test Apparatus Put the dabber on the chuck, then lock Put the test round-wire inserted to dabber’s hole Add corresponding mass on wire , Make the ...
2025-06-20 20:19:04
|
|
Test arrangement for checking mechanical withstanding of insulating materials in thin sheet layers 1.Application: This device is used to test the ...
2025-06-20 20:19:11
|
|
RD4L IT Test Equipment Battery Capacity Voltage Discharge Resistant Tester Battery capacity voltage discharge resistant tester RD4L 1 Introduction 1.1...
2025-06-20 20:19:07
|
|
...Testing of residual voltage after plug disconnect. The KP-1060 disconnects the line at the voltage peak and analyzes results to the requirements of ...
2025-07-15 00:06:07
|
|
Socket Outlet Torque Balance Product details: Model KP-LJ2: The Plug torque tester is for compliance is checked by engaging the device, as during ...
2025-06-20 20:19:05
|
|
IEC60950 Abrasion Resistance Test For Checking Abrasion Strength Of Pcb Scratches 1.Application: The device is used to check abrasion strength of ...
2025-06-20 20:18:31
|
|
IEC 62368-1 Edition 3 Clause 9.6.2 For Wireless Power Transmitters High Temperature Testing Question: What thermocouple type is used, (can I choose ...
2025-06-20 20:18:32
|
|
IEC60065:2014 clause 8.21, figure 16 Mandrel Test Device Non Separable Thin Layer Material Anti Damage Strength Verification Device Standard: Confirm ...
2025-06-20 20:18:32
|
|
Y.5.3 Water spray test The water-spray test apparatus, using fresh water, is to consist of three spray heads mounted in a water supply pipe rack as ...
2025-07-15 00:06:06
|
|
IEC 62368-1-Annex Y.4.4 Compression test-1.35kg hammer Following the test specified in b), the same specimens shall be cooled for a period of 24 h to ...
2025-06-20 20:19:11
|