China Battery Testing Machine manufacturer
KingPo Technology Development Limited
9
Home > Products >

gx53 lamp cap gauge

11 - 20 of 90

gx53 lamp cap gauge

Selling leads
.... Testing: when the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond ... 2025-06-20 20:17:41
...: when the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surgace W shall be co-planar with or project ... 2025-06-20 20:17:41
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ... 2025-06-20 20:17:28
...lamp cap gauge | Gauge for finished lamps fitted with E14 caps for testing contact making | 7006-54-2 Purpose: to check lamp dimensions for contact ... 2025-06-20 20:17:41
...Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max.... 2025-06-20 20:17:47
... the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond ... 2025-06-20 20:17:37
... on finished lamps. TESTING: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall ... 2025-06-20 20:17:27
... Lampholders. TESTING: The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the ... 2025-06-20 20:17:27
...: to check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps on finished lamps. Testing: when the cap on a finished ... 2025-06-20 20:17:37
...lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to ... 2025-06-20 20:17:28
Page 2 of 9 :   |< << 1 2 3 4 5 6 7 8 >> >|