71 - 80 of 90
gu10q cap gauge
Selling leads
|
PURPOSE: To check: (a) Protection against bulb-neck damage by the rim of the E27 lampholder. (b) Contact-making in E27 lampholders with respect to ...
2026-07-14 12:12:54
|
|
ANSI C81.63 Threaded Gauge For Testing Unacceptable Contact-Making In E26d Double Contact-Medium-Screw Based Lampholders ANSI C81.63-2019 3-179...
2025-09-04 18:15:31
|
|
ISO 8124-1 2014 Stainless Steel Protrusion Test Gauge Technical Parameter Material Stainless steel torerances+/-0.1mm 1.Inner diameter 13mm Outer ...
2025-09-04 18:15:40
|
|
UL 498 Temperature Rise Socket Gauge Made of Brass and Plastic
2025-09-04 18:15:32
|
|
...axial strength of the cap does not decrease when the unmounted cap was assembled to the finished lamp, test results on the unmounted cap can be ...
2025-09-04 18:21:26
|
|
"Go" Gauges For Caps On Finished Lamps e11, 7006-6-1
2026-08-03 16:26:13
|
|
Detailed Information IEC60061-3 1 G13 lamp series Pass rule|7006-45-4 Pass check gauge|7006-44-4 2 E17 lamp series Pass rule|7006-27K-1 Stop gauge...
2025-09-04 18:15:18
|
|
UL 1017 clause 5.19.4.1 Figure 9 Impactor for testing mechanical strength for brush caps and switch actuator test purpose:testing mechanical strength ...
2025-09-04 18:15:31
|
|
IEC_62133-2 21A_620e_FDIS Small Cell And Battery Safety Information Provided With Ingestion Hazards Information 8.2 Small cell and battery safety ...
2026-08-03 16:27:13
|
|
IEC 60968-figure 3 Test arrangement for bending moment imparted by the lamp at the lampholder Samples and Restrictions: Semi-luminaires intended for ...
2026-08-03 16:25:09
|