11 - 20 of 230
go no go gauge
Selling leads
|
...gauge | go gauge for dimension "S1" of E27 caps on finished lamps | 7006-27C-1 Purpose: to check the dimensions S1 minimum and S1 maximum ...
2025-09-04 18:15:35
|
|
... designed especially to take candle lamps only. When the switch is in position 1 and the gauge is screwed home in the holder, the indicator lamps ...
2025-09-04 18:15:35
|
|
...gauge | Gauge For Caps on Finished Lamps for Testing Protection Against Accidental Contact E27 | 7006-51-2 Purpose: to check protection against ...
2025-09-04 18:15:36
|
|
... Testing: the screw thread of the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread ...
2025-09-04 18:15:36
|
|
... on finished lamps shown on 7004-21. LED Lamp Cap Gauge Series: IEC60061-3, 7006-27B-1 "Go"gauges for E40 and E27 caps on finished lamps ...
2025-09-04 18:15:41
|
|
...gauge | go gauges for caps E26-7006-27D-3 “GO” GAUGE FOR CAPS CALIBRE «ENTRE» POUR CULOTS E26, E26/50x39, E26/51x39 & E26d Dimensions in millimetre...
2025-09-04 18:15:23
|
|
...gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check ...
2026-08-03 16:26:40
|
|
... (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface O and, ...
2026-08-03 16:26:41
|
|
...gauge | Go gauges for screw threads of lampholders E40 | 7006-25-7 Purpose: to check the minimum dimensions of the lampholder screw thread and ...
2026-08-03 16:26:44
|
|
...gauge | Plug gauge for lampholders for testing protection against accidental contact E40 | 7006-24-3 Purpose: to check the E40 lampholders in ...
2026-08-03 16:26:46
|