61 - 70 of 165
flammability test chamber
Selling leads
|
Needle Flame Tester, IEC60695-11-5 Flammability Testing Equipment Introduction Needle Flame Tester is a simulation experiment project using non-flame ...
2025-07-15 00:06:06
|
|
Low Temperature Test Chamber Product information: The low temperature test chamber conforms to IEC540 standard which is applicable for the low ...
2024-12-09 17:19:27
|
|
...Chamber Product information: The test device is designed and manufactured according to IEC60065:2014 clause 8.3, 8.17 a) and c), 10.3, 13.7, 14.2 ...
2025-06-20 20:16:24
|
|
.... 5. Equipment installation space: At least 3000×2000×2000mm(W×H×D) 6. Chamber Inner size: W1200*D1200*H1200mm 7. Power Supply :AC220V 50HZ 8. ...
2025-06-20 20:21:45
|
|
VOC Release Chamber Usage: * Confirm the influence of environment variables on the release rate and release properties of materials and products; * ...
2025-06-20 20:16:18
|
|
... on the market). 2. No need to defrost in a long time (50 times defrost once) 3. Above the same power to save more than 30% power Product ...
2025-07-15 00:06:07
|
|
Low-temperature impact principle: through the refrigeration system to the low-temperature box temperature down to the set value, open the low...
2025-07-01 21:24:08
|
|
...: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel ...
2025-06-20 20:19:02
|
|
IP78 Immersion-compression Tester Function Description The chamber is applicable to check whether the device and components are ensured good ...
2025-06-20 20:16:10
|
|
IP1/2/3/4-1000 Rain Test Chamber This equipment can be use to inspect the ability of electrical product shell protect product and accessories to rain. ...
2025-06-20 20:18:20
|