41 - 50 of 492
figure 1 test chamber
Selling leads
|
... shock testing caused by ice water. The purpose is to simulate the splashing of ice water into a heating system or component while driving on a wet ...
2026-08-03 16:27:28
|
|
Product Description Condensation test chamber can be integrated low temperature, high temperature, humidity in one test, can do 100% humidity test, is ...
2026-08-03 16:22:41
|
|
Product Description. The air exchange aging test chamber is suitable for the heat resistance test of electrical insulation materials, the air exchange ...
2026-08-03 16:22:43
|
|
... Resistance Test Chamber Function Description The product is suitable for examining the obvious difference of rubber material under difference ...
2025-09-04 18:17:49
|
|
... the same time, after mating with the shaking table, can realize the temperature, humidity, vibration three factors of the comprehensive test ...
2026-08-03 16:22:41
|
|
Product introduction: CCT composite cycle corrosion test chamber can be traditional salt spray, dry and wet alternating mixed salt spray test and most ...
2026-08-03 16:22:40
|
|
Product Description: UV aging test chamber provides stable UV aging test environment for test samples of electronics, electricians, instruments, parts...
2026-08-03 16:22:43
|
|
...Test Chamber Performance Specifications Temperature Range: RT+10℃ to 50℃ Temperature Control Accuracy: ±1℃ Note: Measurement after temperature ...
2026-08-03 16:24:44
|
|
IP1-7 Comprehensive Water Spray Test Chamber Function Description The chamber is applicable to check whether the device and components are ensured ...
2025-09-04 18:17:43
|
|
Test Probe 11 , IEC61032-figure 7 Test Finger Probe , Unjointed test finger According to IEC61032 figure 7 1,Knurled Finger Diameter:12mm 2,Knurled ...
2026-08-03 16:24:55
|