21 - 30 of 131
enteral testing reference connector
Selling leads
... form shall have a radius between 0,15 mm and 0,20 mm (unless otherwise specified). R may be × 45° chamfer. ISO 80369-7-Figure C.1 — Female ...
2025-06-20 20:17:06
|
... plug component parts without overmold shall be tested using the mechanical wrenching test fixture, as illustrated in Figure E-1. The fixture ...
2025-06-20 20:18:49
|
... lock connector to the first complete profile of the internal thread (see Table B.3, dimension t). b Double-start, right-hand thread of 2,5 mm ...
2025-08-03 00:05:35
|
... from unscrewing, stress cracking and non-interconnectable characteristics ISO 80369-7 FIGURE C.1 and C.3 FEMALE LUER REFERENCE CONNECTOR ISO 80369...
2025-08-02 11:23:15
|
...connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications a. Maximum distance ...
2025-07-26 00:13:26
|
ISO 80369-7 Figure C.2 Male Reference Luer Slip Connector For Testing Female Luer Connectors Leakage
... 0,5 mm (maximum) × 45° chamfer. The minimum length of the male taper of 10,5 mm is required for testing non-interconnectable characteristics. A ...
2025-06-20 20:17:07
|
... 0,5 mm (maximum) × 45° chamfer. The minimum length of the male taper of 10,5 mm is required for testing non-interconnectable characteristics. A ...
2025-07-26 00:13:26
|
... 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately ...
2024-12-09 17:19:27
|
...or Figure V.2 are further tested by means of a straight unjointed version of the respective test probe applied with a force of 30 N. If the ...
2025-06-20 20:19:52
|
... using a test fixture shown in Figure E or equivalent. Figure D-1 Example of 4-AxIs Continuity Test Fixture Plugs shall be supplied with a ...
2025-06-20 20:19:06
|