1 - 10 of 434
electrical test flat probes
Selling leads
|
... radius of 4 mm. It shall not be possible to touch live parts with this probe, when it is applied in any position with a force not exceeding 0,5 N, ...
2025-06-20 20:19:59
|
|
... arm. That motion can be equivalently represented by rotating the probe. 2 – The finger ″tip″ is developed to match the dimensions of the UL ...
2025-06-20 20:20:25
|
|
... – Probes for verification Applications: To verify protection of persons against access to hazardous live parts or hazardous mechanical parts To ...
2025-06-20 20:20:05
|
|
...Test Finger Probe Young Adult Arm Probe Stainless Steel Probe Standard description Our product of Test Finger Probe (see Figure 1)shall not to be ...
2025-06-20 20:20:23
|
|
... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box ...
2025-06-20 20:19:55
|
|
... the adult to test whether the hazardous parts can be touched. Customizable: It can be used for anti-electric shock test when equipped with ...
2025-06-20 20:20:24
|
|
... probe is made of stainless steel. Standard:UL1278 Fig 10.1. Application:The heating element and any part of the element assembly (such as an ...
2025-06-20 20:20:26
|
|
Telecom Test Probe Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA ...
2025-06-20 20:20:15
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that ...
2025-06-20 20:20:15
|
|
IT Test Probe Ø12mm, 80mm long with tip radius 6mm Conforms to IEC60950, GB4943
2025-06-20 20:20:12
|