71 - 80 of 173
climatic test chamber
Selling leads|
Low-temperature impact principle: through the refrigeration system to the low-temperature box temperature down to the set value, open the low...
2026-08-03 16:22:42
|
|
ISO 9360-2-figure 1 Test Chamber ISO 9360-2-figure 1 Test Chamber
2026-08-03 16:23:03
|
|
...: – a twin enclosed carbon-arc (see C.2.3) with continuous exposure for a minimum of 720 h. The test apparatus shall operate with a black-panel ...
2026-08-03 16:26:32
|
|
IP78 Immersion-compression Tester Function Description The chamber is applicable to check whether the device and components are ensured good ...
2025-09-04 18:17:42
|
|
IP1/2/3/4-1000 Rain Test Chamber This equipment can be use to inspect the ability of electrical product shell protect product and accessories to rain. ...
2026-08-03 16:26:47
|
|
...Test Chamber / heating enclosure for thermally protected ballasts / Rectifier thermal protection D.1 Test enclosure The heating tests are made in ...
2026-08-03 16:23:29
|
|
...Test Equipment Ingress Protection Test Chamber Product Introduction IPX1/2, IPX3/4 ,IP5/6 waterproof degrees test equipment are designed and ...
2026-08-08 00:21:26
|
|
..., GB31241 and etc . Applications Battery low pressure (high attitude) simulation test, all the testing specimen are being tested under 11.6kPa (1...
2026-08-03 16:23:35
|
|
...Test Chamber Production info: IPx3: 60°on the either side of the vertical IPx4: 180°on the either side of the vertical The support(turnable) for ...
2026-08-08 00:21:26
|
|
...test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in ...
2026-08-08 00:21:25
|
