201 - 210 of 322
80mm iec test finger
Selling leads
|
...Test Machine Product overview The small household appliances power cord bending test machine is deigned and manufactured according to IEC600335-1 ...
2024-12-09 17:19:27
|
|
... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of ...
2024-12-09 17:19:27
|
|
...Test Equipment Ingress Protection Test Chamber Product Introduction IPX1/2, IPX3/4 ,IP5/6 waterproof degrees test equipment are designed and ...
2025-07-29 00:05:03
|
|
..., GB31241 and etc . Applications Battery low pressure (high attitude) simulation test, all the testing specimen are being tested under 11.6kPa (1...
2025-06-20 20:17:13
|
|
Gasket test-IEC 62368-1-Figure Y.1 | Compression test Following the test specified in b), the same specimens shall be cooled for a period of 24 h to ...
2025-06-20 20:19:09
|
|
...Test Equipment that tests the water resistance and waterproofness of in-vehicle parts, electrical components, mobile devices, etc. International ...
2025-07-29 00:05:03
|
|
...–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC ...
2025-06-20 20:20:58
|
|
...ch are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as ...
2025-06-20 20:20:41
|
|
...testing electronic product in accordance with Degrees of Protection Provided By Enclosure IEC(IP code,enhanced type test)as per requirement of ...
2025-07-29 00:05:03
|
|
... standard related rules system. To provide auto parts, electrical and electronic industry, waterproof test design simulation of natural environment ...
2025-07-29 00:05:03
|