31 - 40 of 61
14mm test pin
Selling leads
|
UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center ...
2025-06-20 20:20:25
|
|
...Pin American Standard UL498 plug and socket gauge Gauge drawing number standard number number name 1 Articulate probe with web stop Figure 9.1 UL ...
2025-06-20 20:21:05
|
|
... © IEC(E) STANDARD SHEET 2-Ild sheet 1 Test-VEHICLE INLET2: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE 3 IEC62196-2/Ed.3/CDV © IEC(E) ...
2025-06-20 20:20:48
|
|
...manufacture, it is mainly used to test the plug device and its accessories around, such as dimmers, fuses, switches, power regulators, etc., and it ...
2025-06-20 20:21:00
|
|
... bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter ...
2025-06-20 20:17:28
|
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2025-06-20 20:17:28
|
|
...unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin ...
2025-08-02 11:23:09
|
|
Bs1363-1:1995 Figure 9 | Apparatus For Abrasion Test On Insulating Sleeves Of Plug Pins
2025-06-20 20:20:32
|
|
BS1363-2:1995 Figure 33 | Apparatus For Torsion Test On Pins
2025-06-20 20:20:34
|
|
BS1363-2:1995 Figure 32 | Apparatus For Tests On Adaptor Pins
2025-06-20 20:20:37
|