10.1 Inch TFT LCD Module INNOLUX P101SFA-AF0 Diagonal 1600*RGB*2560
|
10.1 inch TFT LCD Module INNOLUX P101SFA-AF0 diagonal 1600*RGB*2560Description of TFT LCD MODULE INNOLUX P101SFA-AF0
P101SFA-AF0 is a 10.1” (10.1” diagonal) TFT Liquid Crystal Display module with LED Backlight unit and 61 pins MIPI interface.
MIPI interface (Mobile Industry Processing Interface)
The Display Serial Interface standard defines protocols between a host processor and peripheral devices that adhere to MIPI Alliance standards for mobile device interfaces. The DSI standard builds on existing standards by adopting pixel formats and command set defined in MIPI Alliance standards. DSI-compliant peripherals support either of two basic modes of operation: Command Mode and Video Mode. Note: The product only supports Video Mode operation. Video Mode refers to operation in which transfers from the host processor to the peripheral take the form of a real-time pixel stream. In normal operation, the display module relies on the host processor to provide image data at sufficient bandwidth to avoid flicker or other visible artifacts in the displayed image. Video information should only be transmitted using High Speed Mode. To reduce complexity and cost, systems that only operate in Video Mode may use a unidirectional data path.
About TFT LCD Display
Thin-Film-Transistor Liquid Crystal Displays (TFTs) are perhaps the most encountered display technology we see daily. Often seen in cell phones, tablets, cameras and countless other devices, this technology offers several hundreds of thousands of colors with a high pixel count to offer supreme visual clarity. In addition, all TFTs are available off the shelf with resistive and capacitive touch panel options.
The Resistive touch panel senses a touch by measuring where contact is made on the glass. It is independent of temperature and humidity and simple to integrate independent of a separate controller chip.
The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.
Features of TFT LCD Module 1. Customizable FPC cables, LED backlights, and bezels 5. Broad selection of off the shelf products
Applications The 2.4-inch TFT LCD display is a common LCD display with small size and resolution, and is widely used in various electronic devices and application scenarios. The 2.4-inch LCD Module finds applications in various electronic devices and systems, such as handheld devices, industrial control panels, medical instruments, automotive display, consumer electronics, embedded systems, test and measurement equipments, home appliances and so on.
FAQ
1. Do you offer customized service?
2. What payment methods do you accept?
3.Do you provide samples?
4. How long does it take to produce the product?
5. What's the process for placing an order? |
||||||||||||||||||||||||
Product Tags: 10.1 Inch TFT LCD Module P101SFA-AF0 TFT LCD Module |
![]() |
132*64 Graphic Blue/ White Cholesteric Reflective SSZ1603Z LCD Module |
![]() |
128*64 Graphic LCD Module FPC Gray FSTN Transflective Wide Temperature 12H ST7565R With Back Light Industrial Display |
![]() |
320*240 FSTN LCD Module Monochrome For Medical Scan Positive |
![]() |
Graphic 192X64 LCD Module Display With Yellow Green/Blue/Gray Backlight 3.3V/5V |
![]() |
5.1 Inch 240x128 Dot Display Module 5V 22 Pin LCD Screen Graphic T6963c LCD Display |
![]() |
Monochrome Graphic LCD 192x64 Dot Matrix LCD Display Module STN Yellow Green |