Thrust Sensor 10kN Actuator Thrust Measurement 20kN Thrust Load
Cell 50kN
Thrust Sensor FFQ is made of stainless steel utilizing strain gauge
technology to deliver mV/V output from the full wheatstone bridge.
Flanged Column Type Force Sensor FFQ offers 0-500N /
0-1KN / 0-2KN / 0-3KN / 0-5K N/ 0-10KN / 0-20KN / 0-30KN / 0-50KN / 0-100KN ten rated measuring ranges to choose from, Column type force
transducer FFQ is designed for both traction and compression force
measurement with flange-to-flange configuration. Thrust Load Cell FFQ is suitable for applications such as robot grinding
force monitoring, actuator thrust measurement, assembly force
monitoring, bearing press fit measurement, welding clamping force
control, hand press force verification, injection molding machine
extrusion force measurement and so on. In addition to the standard
specifications, Forsentek is also capable of and willing to provide
load cell custom design service to meet requirements of different
applications.
Specifications
| Capacity | 50kg / 500N / 110lbf 100kg / 1kN / 220 lbf 200kg / 2kN / 450 lb 300kg / 3kN / 660lb 500kg / 5kN / 1.1klb 1000kg / 10kN / 2.2klb 2000kg / 20kN / 4.4klb 3000kg / 30kN / 6.6klb 5000kg / 50kN / 11klb 10ton/ 100kN / 22klb |
| Rated output | 1.5 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.3% R.O. |
| Hysteresis | ±0.3% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 750±100 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø4.2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Output signal of load cell:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Flanged Thrust Transducer FFQ is normally around
1.5mV/V.
Power supply of Flange Type Thrust Sensor FFQ is normally
within 3-15V.
Load / Capacity is within 0-1.
So the output range of Thrust Sensor FFQ is normally within
0…+22.5mV.
Example one: Flange Type Thrust Transducer FFQ-10kN with 1.5mV/V
sensitivity powered by 10V DC,the output range is 0...+15mV.
Example two: Flange Mounted Thrust Load Cell FFQ-50kN with
1.4mV/V rated output powered by 10V DC,the output range is
0...+14mV.
The mV/V output from the wheatstone bridge sometimes can hardly be
processed directly, a signal conditioner can be used with the load
cell to deliver 0~5V, 0-10V or 4-20mA output.
Example one: Flange Type Thrust Sensor FFQ-10kN working with
amplifier FSC(0-10V)-24V, the Load-Voltage relationship will be
0-10kN thrust load VS 0-10V output, which is linear regardless
of the measurement error, 0V output corresponds to "0" load, 1V
output corresponds to 1kN thrust load, 2V output corresponds
to 2kN Thrust load, and so on.
Example two: Flanged Thrust Load Cell FFQ-20kN working with
amplifier FSC(4-20mA)-24V,the Force-Current relationship will be
0-20kN Thrust Load VS 4-20mA output, which is linear
regardless of the measurement error, 4mA output corresponds to “0”
load, 5.6mA output corresponds to 2kN thrust load, 12mA output
corresponds to 10kN thrust load, and so on.
Thrust Load Cell 10kN Cylinder Thrust Measurement 20kN Thrust
Sensor 50kN
Click here to download datasheet
