M8 threaded Load Cell Sensor 500N 1kN 2kN Force Measurement
Transducer
Low Height Compression Force Transducer FCB-A utilizes strain gauge technology inteneded for both
tension and compression force measurement. Compact design, suitable
for force measuring applications where installation height is
limited. Low Profile Load Cell FCB-A offers 0-500N / 0-1000N / 0-2000N three rated measuring
ranges with mV/V output as standard,0-5V or 4-20mA output is
available through external amplifier. Different force loading tools
can be mounted to the M8*1 threaded hole located at the center of
the force sensor for different applications. Compressive Force
Sensor FCB-A is RoHS compliant and CE certified, it can be modified
or customized as per client's request.
Dimensions(Unit in "mm")
Specifications
| Capacity | 500N / 50kg / 110lb 1000N / 100kg / 220lb 2000N / 200kg / 440lb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 750±30 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy |
| Cable | Ø4*2000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A loadcell (or load cell) is a transducer which converts force into
a measurable electrical output. Strain gauge based load cells are
the most commonly used type and suitable for almost all industrial
applications.Strain gauge load sensors contain wheatstone bridge
within them to deliver mV output signal which is proportional to
the applied load/force under constant power supply, thus the
load/force can be measured by measuring the output signal from the
transducer. The output range of FCB-A is normally within
-25mV...+25mV(tension and compression), signal amplification may be
required for most applications, a signal conditioner can be used to
convert mV signal into -5~5V, 0-10V or 4-20mA output for easy data
processing. Taking compression load cell FCB-A-2kN working with amplifier FSC(0-10V)-24V for example,the
force-voltage relationship will be compression force 0-2000N VS 0-10V voltage output, 1V output corresponds to 200N force, 5V
output corresponds to 1000N force,and so on.
M8 threaded Load Cell Transducer 500N 1kN 2kN Force Measurement
Sensor
Click here to download datasheet
