50kg 100kg 200kg 300kg 500kg compression load cell with indicator
Low profile compression load cell FCMA is made of high stiffness
alloy steel based on foil strain gauge technology to deliver
2.0mV/V rated output proportional to the applied force.Pancake load
cell FCMA offers 30kg / 50kg / 100kg / 200kg / 300kg / 500kg / 1000kg seven
different measuring ranges with maximum 0.1% non-linearity of the
rated output to choose from intended for both static and
dynamic force measurement,low profile load cell FCMA can be used
for both tension and compression measurement,low profile structure makes it also suitable for in-line force
monitoring.Model FCMA is designed with a M16x1.5 threaded hole
running through the center of the transducer which can be used to
mount attachments such as load buttons,eye bolts or other adapters
for force loading,this makes spoke type load cells very adaptable
to various cases,you may find pancake type load cell FCMA
applicable for force measurement in injection-molding
machines,press machines and material testing equipment,weight
measurement for tanks,vessels and hoppers, and so on.
Dimensions
Specifications
| Capacity | 30kg / 300N / 66 lbf 50kg / 500N / 110lbf 100kg / 1kN / 220lb 200kg / 2kN / 440 lb 300kg / 3kN / 660 lbf 500kg / 5kN / 1.1k lb 1000kg / 10kN / 2.2klbf |
| Rated output | 2.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% F.S. |
| Hysteresis | ±0.1% F.S. |
| Nonrepeatability | ±0.05% F.S. |
| Creep(5min) | ±0.05% F.S. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 750±50 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Alloy steel |
| Cable | Ø5*2000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A load cell sensor is a transducer that converts a load or force
acting on it into electronic signal which is proportional to the
load(or force) being applied.The measured load or force causes
deformation of the measuring element(elastic body),the bonded
strain gauge deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the load/force can be measured by measuring the output signal from
the load cell. Pancake load cell FCMA outputs millivolt signal ranging 0-30mV,and
signal amplification may be required for most applications,a load
cell signal transmitter can be used to get 0-5V,0-10V or 4-20mA signal for easy data acquisition afterwards.Load
cell with indicator can display the measured value,load cell display FPT is integrated with
high accuracy 24 bit Sigma-Delta ADC,sampling speed up to
960Hz,supports RS485 or RS232 communication port,can also output
0-5V,0-10V,0-20mV or 4-20mA amplified signal.
Click here to download datasheet
