In-line Load Cell Tension Compression Load Cell 5kN 3kN 2kN 1kN
500N
M8 Threaded Rod End Compression And Tension Inline Load Cell FL34
is made of 17-4 stainless steel and CE certified. In-line force
transducer FL34 offers rugged structure for industrial
applications. In-line load cells are designed to be mounted inline
to the load axis for both tension and compression force
measurement.The Inline Force Sensor FL34 can be easily mounted to
existing system through M8 threaded rods located on both sides of
the transducer,these metric threads can also be used to mount
attachments,such as female eye bolt, bolt adapter, etc., to fit
different usage requirements. Tension and Compression
Inline Force Transducer FL34 uses metal foil strain gauge
technology to deliver 1.5mV/V rated output with 500N / 1KN / 2KN /
3KN / 5KN five rated capacities to choose from. Each sensor is
integrated with a 3-meter-long 4-core shielded cable,the cable
comes with a free end which makes it easy to assemble any types of
connectors for electrical connection. Compression Tension Load Cell
FL34 is normally used for press-in force measurement, cylinder push
pull force measurement, auto equipment,production line, hand press
machine.etc. Custom made service is available for other measuring
ranges with similar structure.
Dimensions
Specifications
| Rated capacity | 500N / 50kg / 110lb 1KN / 100kg / 220lb 2kN / 200kg / 450lb 3kN / 300kg / 670lb 5kN / 500kg / 1120lb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.5% of R.O. |
| Hysteresis | ±0.5% of R.O. |
| Nonrepeatability | ±0.2% of R.O. |
| Creep(5min) | ±0.1% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 385±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP66 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation-
Green--Signal+ White--Signal- |
A load cell is a transducer that converts load or force acting on
it into electronic signal which is proportional to the applied
force.The acting force causes deformation of the measuring
element,the bonded strain gage deforms accordingly which will cause
the resistance change of the wheatstone bridge,under constant power
supply,the output signal between Sig+ and Sig- will change
proportionally,thus the load/force can be measured by measuring the
output signal from the load cell.Threaded inline load cell FL34 is
designed to measure both tension and compression force,outputs
millivolt signal ranging -25...+25mV, and signal amplification may
be required for most applications, a load cell signal conditioner
can be used to get -5~5V, 0-10V or 4-20mA signal which is
proportional to applied force.The amplified output is can be easily
processed by PLCs and data acquisition software.The applied force
can be displayed through a force indicator,force indicator FPT is
integrated with high accuracy/low noise 24 bit Sigma-Delta
ADC,sampling speed up to 960Hz makes it suitable for both static
and dynamic measurement;FPT also supports Modbus RTU protocol with
RS485 or RS232 communication port,amplified signal
0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
In-line Load Cell Tension Compression Load Cell 5kN 3kN 2kN 1kN
500N
Click here to download datasheet
