100kg Compression Load Cell 1kN Compression Force Sensor 200lb
Low Profile Compression Load Cell FCB-A utilizes strain gauge technology inteneded for both tension
and compression force measurement. Compact design, suitable for
force measuring applications where installation height is limited. Compression Force Sensor FCB-A offers 0-500N / 0-1000N / 0-2000N three measuring ranges to
choose from, model FCB-A delivers mV/V output proportional to the
applied load from the full wheatstone bridge. Different force loading tools can be attaached to the M8*1 threaded
hole located at the center of the force sensor for different
applications. Low profile load cell FCB-A is RoHS compliant and CE
certified,it can also be modified or customized as per client's
request.
Dimensions
Specifications
| Capacity | 500N / 50kg / 110lb 1KN / 100kg / 220 lb 2KN / 200kg / 440lb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(10min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 750±30 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy |
| Cable | Ø4*2000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Sensor is a transducer that converts mechanical load into
electrical signal which is proportional to the load being
applied.The measured load or force causes deformation of the
measuring element(elastic body),the bonded strain gauge deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally, thus the
load/force can be measured by measuring the output signal from the
load cell which is normally within -25mV...+25mV for model FCB-A. A
load cell signal amplifier can be used to convert mV signal into
0-5V/0-10V/4-20mA for easy signal processing. Taking FCB-A-1kN and
FSC(0-10V)-24V,the load-voltage relationship will be 0-1000N load
VS 0-10V output, 1V voltage corresponds to 100N load, 2V voltage
corresponds to 200N force,5V voltage corresponds to 500N force,and
so on.
100kg Compression Load Cell 1kN Compression Force Sensor 200lb
Click here to download datasheet
