Compression And Tension Force Transducer 100N Tension Compression
Load Cell 20lb
Threaded Inline Compression And Tension Load Cell FL25 is made of
17-4 stainless steel and CE certified.In-line force transducer FL25
offers rugged structure for industrial applications.Inline load
cells are designed to be mounted inline to the load axis for both
tension and compression force measurement.The force sensor FL25 can
be easily mounted to existing system through M5 or M6 threaded rods
located on both sides of the transducer,these metric threads can
also be used to mount attachments,such as female eye bolt,bolt
adapter,etc.,to fit different usage requirements. Tension and
Compression Force Transducer FL25 uses metal foil strain gauge
technology to deliver 2.0mV/V rated output with 5kg / 10kg / 20kg /
30kg / 50kg / 60kg / 100kg seven rated capacities to choose from.
Each sensor is integrated with a 4-meter-long 4-core shielded
cable,the cable comes with a free end which makes it easy to
assemble any types of connectors for electrical connection.Inline
Load Cell FL25 is normally used for press-in force measurement,
cylinder push pull force measurement, auto equipment,production
line, hand press machine.etc.
Dimensions
Specifications
| Rated capacity | 50N / 5kg / 11lb 100N / 10kg / 22lb 200N / 20kg / 44 lb 300N / 30kg / 66lb 500N / 50kg / 110lb 600N / 60kg / 130lbf 1KN / 100kg / 220 lb |
| Rated output | 2.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.5% of R.O. |
| Hysteresis | ±0.5% of R.O. |
| Nonrepeatability | ±0.2% of R.O. |
| Creep(10min) | ±0.1% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 700±30 ohms |
| Output resistance | 700±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP64 |
| Material of element | Stainless steel |
| Cable | Ø3*4000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation-
Green--Signal+ White--Signal- |
A load cell is a transducer that converts load or force acting on
it into electronic signal which is proportional to the applied
force.The acting force causes deformation of the measuring
element,the bonded strain gage deforms accordingly which will cause
the resistance change of the wheatstone bridge,under constant power
supply,the output signal between Sig+ and Sig- will change
proportionally,thus the load/force can be measured by measuring the
output signal from the load cell.Threaded rod end tension and compression load cell FL25 is designed to measure both tension and compression
force,outputs millivolt signal ranging -20~20mV, and signal
amplification may be required for most applications, a load cell
signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal
which is proportional to applied force.The amplified output is can
be easily processed by PLCs and data acquisition software.The
applied force can be displayed through a force indicator,force
indicator FPT is integrated with high accuracy/low noise 24 bit
Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for
both static and dynamic measurement;FPT also supports Modbus RTU
protocol with RS485 or RS232 communication port,amplified signal
0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Compression And Tension Force Transducer 100N Tension Compression
Load Cell 20lb
Click here to download datasheet
