Button load cell 500kg 5000N small weight sensor 5KN press sensor
Miniature Button Load Cell FCLB is made of stainless steel based
on strain gauge technology which offers 5kg / 10kg / 20kg / 50kg /
100kg / 200kg / 500kg seven rated capacities to choose from,compact
design makes button type load cell FCLB suitable for compression
force measurement applications with limited mounting space. Each
sensor comes with a 3-meter-long shielded cable, 4xM2.5 threaded
holes located on the bottom make it easy to mount force sensor FCLB
to a flat platform,you may find Miniature Force Transducer FCLB
suitable for applications such as load distribution analysis, mold
pressure measurement, force overload protection, clamping force
measurement, assembly force monitoring, hydraulics force control
and so on.
Dimensions(unit in "mm")
Specifications
| Capacity | 50N / 5kg / 11lb 100N / 10kg / 22 lb 200N / 20kg / 45lb 500N / 50kg / 110lb 1kN / 100kg / 220 lbf 2kN / 200kg / 450 lb 5kN / 500kg / 1120 lbf |
| Rated output | 1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(3min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Cell is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gage deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell.Miniature Button Load Cell FCLB is designed to measure force in compression direction,outputs
millivolt signal within 0~20mV, and signal amplification may be
required for most applications, a load cell signal conditioner can
be used to convert mV signal into -5-5V, 0-10V or 4-20mA output
which is proportional to applied force.The amplified output then
can be easily processed by PLCs and data acquisition software. The
force can also be displayed through force indicator,force meter FPT
is integrated with high accuracy/low noise 24 bit Sigma-Delta
ADC,sampling speed up to 960Hz makes it suitable for both static
and dynamic measurement;FPT also supports Modbus RTU protocol with
RS485 or RS232 communication port,amplified signal
0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Miniature Button Load Cell 500kg 200kg 100kg 50kg 20kg 10kg For Compression Force Measurement
Click here to download datasheet
