450lb Tension Force Transducer 2000N Tension Force Measurement
Sensor 2KN
M8 Threaded Rod End Compression And Tension Load Cell FL34 is made
of 17-4 stainless steel and CE certified. In-line force transducer
FL34 offers rugged structure for industrial applications. Inline
load cells are designed to be mounted inline to the load axis for
both tension and compression force measurement.The force sensor
FL34 can be easily mounted to existing system through M8 threaded
rods located on both sides of the transducer,these metric threads
can also be used to mount attachments,such as female eye bolt, bolt
adapter, etc., to fit different usage requirements. Tension and
Compression Force Transducer FL34 uses metal foil strain gauge
technology to deliver 1.5mV/V rated output with 500N / 1KN / 2KN /
3KN / 5KN five rated capacities to choose from. Each sensor is
integrated with a 3-meter-long 4-core shielded cable,the cable
comes with a free end which makes it easy to assemble any types of
connectors for electrical connection. Compression Tension Load Cell
FL34 is normally used for press-in force measurement, cylinder push
pull force measurement, auto equipment,production line, hand press
machine.etc. Custom made service is available for other measuring
ranges with similar structure.
Dimensions
Specifications
| Rated capacity | 500N / 50kg / 110lb 1KN / 100kg / 220lb 2kN / 200kg / 450lb 3kN / 300kg / 670lb 5kN / 500kg / 1120lb |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.5% of R.O. |
| Hysteresis | ±0.5% of R.O. |
| Nonrepeatability | ±0.2% of R.O. |
| Creep(5min) | ±0.1% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 385±30 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP66 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation-
Green--Signal+ White--Signal- |
A force sensor is a transducer that converts load or force acting
on it into electronic signal which is proportional to the applied
force.The acting force causes deformation of the measuring
element,the bonded strain gage deforms accordingly which will cause
the resistance change of the wheatstone bridge,under constant power
supply,the output signal between Sig+ and Sig- will change
proportionally,thus the load/force can be measured by measuring the
output signal from the load cell.Threaded rod end tension force transducer FL34 is designed to measure both tension and compression
force,outputs millivolt signal ranging -25...+25mV, and signal
amplification may be required for most applications, a load cell
signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal
which is proportional to applied force.The amplified output is can
be easily processed by PLCs and data acquisition software.The
applied force can be displayed through a force indicator,force
indicator FPT is integrated with high accuracy/low noise 24 bit
Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for
both static and dynamic measurement;FPT also supports Modbus RTU
protocol with RS485 or RS232 communication port,amplified signal
0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
450lb Tension Force Transducer 2000N Tension Force Measurement
Sensor 2KN
Click here to download datasheet
