Small Load Button Load Cell 20kg Compression Force Measurement
Sensor 200N
Small Size Load Button Load Cell FCLB is made of stainless
steel based on strain gauge technology which offers 5kg / 10kg /
20kg / 50kg / 100kg / 200kg / 500kg seven rated capacities to
choose from,compact design makes button type load cell FCLB
suitable for compression force measurement applications with
limited mounting space. Each compression sensor comes with a
3-meter-long shielded cable, 4xM2.5 threaded holes located on the
bottom make it easy to mount miniature force sensor FCLB to a flat
platform,you may find Miniature Compression Force Load Cell FCLB
suitable for applications such as load distribution analysis, mold
pressure measurement, force overload protection, clamping force
measurement, assembly force monitoring, hydraulics force control
and so on.
Dimensions(unit in "mm")
Specifications
| Capacity | 50N / 5kg / 11lb 100N / 10kg / 22 lb 200N / 20kg / 45lb 500N / 50kg / 110lb 1kN / 100kg / 220 lbf 2kN / 200kg / 450 lb 5kN / 500kg / 1120 lbf |
| Rated output | 1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(3min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Load Cell is a transducer that converts force acting on it into
electronic signal which is proportional to the applied force.The
acting force causes deformation of the measuring element,the bonded
strain gage deforms accordingly which will cause the resistance
change of the wheatstone bridge,under constant power supply,the
output signal between Sig+ and Sig- will change proportionally,thus
the force can be measured by measuring the output signal from the
load cell.Miniature Button Load Cell FCLB is designed to measure
force in compression direction,outputs millivolt signal within
0~20mV, and signal amplification may be required for most
applications, a load cell signal conditioner can be used to convert
mV signal into -5-5V, 0-10V or 4-20mA output which is proportional
to applied force.The amplified output then can be easily processed
by PLCs and data acquisition software. The force can also be
displayed through force indicator,force meter FPT is integrated
with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed
up to 960Hz makes it suitable for both static and dynamic
measurement;FPT also supports Modbus RTU protocol with RS485 or
RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or
4-20mA is also achievable from FPT.
Small Load Button Load Cell 20kg Compression Force Transducer 200N
Click here to download datasheet
