Electric rotary table iqualitrol VAC-2 compact program controlled
vacuum mounting press
Technical Data Download: iqualitrol vacuum mounting machine VAC-2
Brief Introduction:
iqualitrol VAC-2 is a light and compact program-controlled vacuum
mounting machine.
External compressed air can be quickly and effectively vacuumed,
and it can also be connected to a vacuum pump for vacuum cold
mounting of epoxy resin.
With excellent pore impregnation function, it allows epoxy resin to
penetrate into tiny pores and cracks quickly and efficiently, thus
ensuring edge protection and full filling of the sample.
VAC-2 is ideal for porous materials, such as failure analysis
specimens for cracks, porous castings, composites and preparation
of samples for electronic components, rock minerals, ceramics, etc.
Technical Specifications: | Model | | VAC-2 | | Electrical | Power Supply | AC100-240V, 50Hz, 35W
(Vacuum pump not included) | | Control Panel | 5” touch screen | | Timing Cycle | Range 0-10min, automatic vacuumize/
deflation, cycle repeated | | Maximum number of cycles | 100 | | Program | 20 groups | | Vacuum | Vacuum Level | 0 ~ -80kPa, vacuum pump 0 ~ -90kpa | | Maximum Vacuum Flow | 75L/min | | Air Consumption | 28-42L/min | | Noise | 55-60dBA | | Chamber | Diameter | Inner diameter Φ252,
Place 12 Φ40 samples Simultaneously | | Height | For molds with a diameter of less than 100mm,
the Max. of height is 100mm;
For molds with a diameter of more than 100mm, the Max. of height is
80mm. | | Tray Rotation | Electric button, direction: clockwise/counterclockwise | Operating
Environment | Temperature | 0-60˚C | | Humidity | 0-95%RH | | Supply Air | Pressure | OD=Φ6mm pipe, Pressure requirement 0.6~0.7MPa | | Vacuum Pump (Optional) | Voltage | Same with the power input | | Power | Max:1000W | | | Cable Connector | National standard three-core type male plug | | Dimension | W*D*H | 497×461×293mm (Close), 497×461×655mm(Open) | | Weight | 18kg |
|
