151 - 160 of 179
smoke density flammability tester
Selling leads
|
EN ISO 1182 :2020 Non-combustible laboratory Furnace for Building Materials Application Applicable to tests for determining whether a building ...
2024-12-09 18:38:58
|
|
EN13823 SBI Single Burning Item Flammability Testing Equipment Product Introduction The single Burning test is a new method standard published and ...
2024-12-09 20:12:06
|
|
Building Materials Flammability Tester Radiant Flooring Panel Apparatus Application Critical Radiant Flux is the main parameters of the fire risk for ...
2024-12-09 23:42:36
|
|
Building Materials Flame Spread Testing Equipment Product Introduction BS 476 part 6 specifies a method of test, the result being expressed as a fire ...
2024-12-09 18:39:54
|
|
FAA Aircraft Materials Fire Test Handbook, Chapter 5 Tester for Rate of Heat Release OSU Heat Release Rate Tester.pdf Ⅰ. (Introduction) This Tester is ...
2024-12-09 20:03:25
|
|
...Flammability Tester is used for conductor diameter greater than 8mm (cross-sectional area greater than 0.5mm2) or less than 8mm (cross-sectional ...
2024-12-09 18:11:34
|
|
...Tester is its Sample Clamping Angle of 45 Degree, which allows for accurate and reliable testing of materials. Additionally, the Volume Of Chamber ...
2024-12-09 23:57:37
|
|
VW-1 Flammability Tester Product Description The VW-1 combustion tester is produced in strict accordance with UL standards It fully complies with the ...
2024-12-09 23:18:12
|
|
Radiant Heat Flux Test Device for Paving Materials Application It is suitable for testing with paving materials that are placed in a small flame and ...
2025-07-24 00:09:04
|
|
Cone Calorimeter Application Suitable for testing the heat release rate of building materials. Standard: ISO5660-1:2002 Technical Parameters Power ...
2025-07-24 00:09:05
|