1 - 10 of 311
iso 5660 flammability testing equipment
Selling leads
|
ISO 5660 Cone Gauge Calorimeter Application The oxygen consumption calculated from the oxygen concentration in the combustion product gas stream and ...
2024-12-09 18:14:14
|
|
ISO 9705 Flammability Testing Equipment Physical Room Fire Corner Fire Test Device Product introduction This part of ISO 9075 specifies the test ...
2024-12-09 18:13:37
|
|
ISO 5660 Cone Calorimeter Application The oxygen consumption calculated from the oxygen concentration in the combustion product gas stream and the ...
2024-12-09 23:18:12
|
|
... were tested in a sealed oven with a radiant heat source of 2.5 w/cm2. Beam attenuation tests were performed under open flame and non-flame ...
2024-12-09 18:02:18
|
|
... tester complies with ISO 3795, ASTM D5132, FMVSS 302, etc. Horizontal Flammability Tester, to determine the comparative burn rates and burn ...
2025-07-16 00:07:00
|
|
.... This equipment’s the oxygen analyser is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability. TI ...
2024-12-09 18:03:30
|
|
... doors, horizontal sliding doors, vertical sliding doors, (including linked sliding doors and sectional doors), Fire resistance test of rolling ...
2024-12-09 18:20:48
|
|
... than 8mm (section area is greater than 0.5mm2) or less than 8mm (section area less than 0.5mm2) of single wire and cable flammability evaluation. ...
2024-12-09 17:56:21
|
|
ISO5660 Cone Calorimeter Analysis Instrument For Heat Release Product introduction Cone Calorimeter measures heat release rate(H.R.R), smoke release, ...
2025-07-16 00:07:01
|
|
..., used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether the flammability of the ...
2024-12-09 17:51:53
|