1 - 10 of 290
iso 5660 fire test equipment
Selling leads
|
ISO 5660 Cone Calorimeter Application The oxygen consumption calculated from the oxygen concentration in the combustion product gas stream and the ...
2024-12-09 23:18:12
|
|
... rate is also the most important parameter in the material combustion performance, and the heat release rate in the material combustion process is ...
2024-12-09 18:14:14
|
|
... (section area is greater than 0.5mm2) or less than 8mm (section area less than 0.5mm2) of single wire and cable flammability evaluation. Suitable ...
2024-12-09 17:56:21
|
|
...standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test ...
2024-12-09 23:42:36
|
|
...standards, and meets the requirements of the convective heat resistance test standard of domestic AQ 6103-2007 welder protective gloves. The test ...
2024-12-09 19:00:03
|
|
...Fire Testing Equipment Vertical Flame Tester Product Introduction Vertical Flame Tester is suitable for the measurecan be pre-setted and adjusted ...
2024-12-09 19:00:03
|
|
ISO5660 Cone Calorimeter Analysis Instrument For Heat Release Product introduction Cone Calorimeter measures heat release rate(H.R.R), smoke release, ...
2025-07-24 00:09:05
|
|
Fire Testing Equipment AQ 6103,EN 60903 Vertical Flame Tester Description According to GB/T 17622-2008 and EN 60903 the insulating glove fire ...
2024-12-09 19:00:03
|
|
ISO 9705 Flammability Testing Equipment Physical Room Fire Corner Fire Test Device Product introduction This part of ISO 9075 specifies the test ...
2024-12-09 18:13:37
|
|
ASTM, ISO 4589-2 High Reliability Oxygen Index Tester (Paramagnetic) Product introduction Oxygen Index Tester measures minimum oxygen concentration as ...
2024-12-09 19:24:58
|