161 - 170 of 841
foam testing flammability tester
Selling leads
|
...foam sample can be tested and tested according to the national standard, and the hardness of the sponge, foam and other materials can be accurately ...
2025-07-27 00:06:18
|
|
... test item. Technical parameters Internal tube diameter is 38 mm and made of tranparant plastic. distance from the bottom edge of the tube to the 0...
2024-12-09 18:36:59
|
|
Building Material Burning or Decomposition Smoke Density Testing Machine Technical standards ASTM D2843, DIN4102 standard requirements Technical ...
2024-12-09 18:38:58
|
|
Cone Calorimeter Application Suitable for testing the heat release rate of building materials. Standard: ISO5660-1:2002 Technical Parameters Power ...
2025-07-27 00:06:18
|
|
... the flat panel, the screw rotation, compression to a certain rate, and then into a certain temperature of the oven (optional), after the specified ...
2024-12-09 23:54:34
|
|
|
... the flat panel, the screw rotation, compression to a certain rate, and then into a certain temperature of the oven (optional), after the specified ...
2024-12-09 23:54:34
|
|
Automotive Interior Material Vertical Combustion Tester Product introduction According to the standard GB32086-2015 “Technical Requirements and Test ...
2024-12-09 18:10:04
|
|
Thermal Conductivity System Tester Application Applicable to: thermal conductivity of clay and sand dry test specimens, the thermal resistance of the ...
2024-12-09 18:38:58
|
|
..., carpets, blocks, plates and prefabricated insulation tubes. Technical Parameters 1. Heating plate: Made of SUS304 stainless steel, the test area ...
2024-12-09 18:38:58
|
|
BS 476-7 Surface Spread Flame Tester for Measuring the Flame Extension of The Wall Product introduction BS 476 Part 7 specifies a method of test for ...
2024-12-09 19:13:47
|