91 - 100 of 299
building materials ignitability tester
Selling leads
|
...Tester Ladder Type GB18380.31:2008, IEC60332-3-10:2000 Application Apply to evaluate suppression ability of spread of fire for bundles installed ...
2025-12-17 19:14:30
|
|
...Tester Description According to GB/T 17622-2008 and EN 60903 the insulating glove fire resistance test device is developed, which is suitable for ...
2024-12-09 19:00:03
|
|
... on the bracket of the combustion box. The flame is ignited by the control box for a certain time, and the flame is extinguished. Observe the flame ...
2024-12-09 19:39:07
|
|
... on the bracket of the combustion box. The flame is ignited by the control box for a certain time, and the flame is extinguished. Observe the flame ...
2024-12-09 20:07:49
|
|
... Description: One of the key features of this Electric Wire Fire Tester is its Sample Clamping Angle of 45 Degree, which allows for accurate and ...
2026-04-08 16:27:05
|
|
Door Roller Blind Fire Tester Uses It is suitable for the fire resistance test of the building with the door, the door and the roller blind. The fire ...
2024-12-09 18:39:54
|
|
...Automatic Interior Materials Burning Tester Application Horizontal Flammability Tester, to determine the comparative burn rates and burn resistance ...
2024-12-09 17:51:53
|
|
Akron Abrasion Tester Product information To measure abrasion resistance of out-sole material This tester is designed to use together with a special ...
2024-12-09 18:29:11
|
|
... under regulated testing conditions ignited by outer flame and burned a certain time to measure the minimum temperature of the material application ...
2024-12-09 20:07:49
|
|
...Materials Fire Test Handbook, Chapter 5 Tester for Rate of Heat Release OSU Heat Release Rate Tester.pdf Ⅰ. (Introduction) This Tester is used to ...
2024-12-09 20:03:25
|