SL-E01 Foam Environment Pretreatment Test Machine Temperature and Humidity Test Chamber

SL-E01 Temperature and Humidity Test Chamber

Machine Introduction

This machine is an independent test equipment for electrician, aviation, automobile, home appliance, paint, scientific research, etc., used to test and determine electrical, electronic and other products and materials.

Features

Power Supply Source: Single-phase, AC220V~AC380V, 50Hz~60Hz, 5KW~14KW;
Imported high-precision microcomputer color touch screen temperature and humidity controller, switch between Chinese and English;
Test hole (left side of the machine) 50mm, can be used for external test power cable or signal cable;
Original European and American imported fully enclosed low noise high and low temperature compressor;
Double-layer high temperature resistant high-strength sealing strip is used between the door and the box to ensure sealing;
The inner and outer boxes are made of imported (SUS#304) stainless steel;
The observation window adopts multi-layer hollow tempered glass and inner glued sheet type conductive film (the test process can be clearly observed);
Safety protection device, when any failure occurs, the fault status is immediately displayed on the screen and the power is cut off to ensure the safety of the machine, the tested product and the use.

Applications

>To simulate test environment with different temperature and humidity;

>Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test;

>Moistening test and drying test…

>Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation;

>Uncover test unit weakness in a short-term test with accelerated time effect.

Technical Parameter: