Xiamen Yimeng Supply China Co.,ltd

Our factory specialized in headwear, do professional things with professional heart !

OEM Workflow:

your idea →we make sample and send to you →you confirm and order →deposit →product →pay balance →shipment →After service

Our factory was equipped with over 260 sewing machines and 8 embroidery machines. Our monthly production capacity is around 50000 dozs. We have strict quality control system to make sure all the goods are in good quality before shipment.

We are always at the forefront of new technology and catch new pop styles on the market. Our professional knowledge experience and prompt delivery will bring excellent service to you.

Use advanced facility,professional technology,profession people with professional heart.

How control the quality:

First, the establishment of efficient process patrol function, that is, the establishment of IPQC for process inspection. The main control due to process methods, with the wrong material, color, size and other bulk quality problems, but also other time to monitor the problems. IPQC must specify the number of inspection intervals, check the number of times, and fill in the checklist, the main record of bad items, the issue of important quality issues CAR (corrective action report) to improve.

Second, the establishment of FQC in the process for a fixed test, under normal circumstances is the whole inspection operations, such as the workshop to the end of the product, or one or two processes a class of production, you can use FQC to ensure product quality, the same to fill Check the table for bad analysis.

Third, how to make IPQC, FQC homework?

1.  the quality control department to receive the system, the original board, the need to do a "product inspection instructions", which details the test items (appearance, size, function, structure, etc.), indicating a particularly prone to quality problems The original board is easy to produce when the bad phenomenon). And the defect in the inspection project is divided into CR (serious or fatal flaw), MAJ (main defects), MIN (minor defects) three levels to determine.

2. When the workshop production of large goods, the workshop leader to be the first piece, the first self-test OK to fill in the "first model to confirm the report" (in duplicate), and then attached to the first model with the Department of Quality Control, After the inspection, the test results will be filled in the "first sample confirmation report", "the first model to confirm the report" on the marked or not, usually half an hour with the "first model to confirm the report" second joint reply workshop, Qualified to sign the first model attached to the "product inspection instructions", to pay IPQC for the quality of the process to determine the basis for testing. Unqualified direct response to improve the workshop, the workshop improved after the good return to self-test, re-send the "first model to confirm the report" and the first model, until OK.

3. If the quality control department to confirm a long time, more than half an hour, short delivery period, the factory approved, the workshop can be self-test, first self-production, IPQC according to "product inspection instructions" inspection. The first piece of confirmation is conducive to the process, with the wrong material, color, size and other issues of batch rework. Production workshop based on "the first model to confirm the report" and the first model work.

4. IPQC according to the tour inspection time interval, the number of inspection once, the first model, "the first model to confirm the report", "product inspection instructions" for inspection operations. Such as in the tour inspection found in quality problems, IPQC need to go back to the last inspection period, blocking the bad goods downstream.

5. FQC also based on the first model, "the first model to confirm the report", "product inspection instructions" for inspection operations. IPQC tour test found in the poor project statistics provided to the FQC, so that FQC IPQC test bad items for key testing. Qualified paste "PASS" under the goods, unacceptable "NG" rework, difficult to determine the quality of the matter submitted to the material audit team, by the material audit team for the final decision.

Fourth, if you want a better quality assurance, in the IPQC, FQC set up QA, FQC test after the product sampling, you can use the US military standard 105E sampling plan, or China GB2828 sampling test program and other standards, take a certain AQL value, such as AQL: CR = 0 MAJ = 1.5 MIN = 2.5, and then check the strict distinction:

1, the normal test: under normal circumstances to take such tests, inspection level to take "Ⅱ";

2, strict test: continuous 5 batches of two batches were rejected when the use of such tests, the test level to take "Ⅲ";

3, relaxation test: 10 consecutive batches of all received when using this test, check the level of "Ⅰ" In the case of inspection, if the quality of the approved batch is improved, and the continuous 5 batches are received, they can return to the normal inspection, and vice versa.

In the case of relaxation test, if there is a batch of unqualified, it is necessary to return to the normal test state. In particular, the product is subject to strict and relaxed inspection. These measures are conducive to the rational allocation of manpower, so that QA have more time for shipment inspection, so the ultimate goal is to effectively ensure the quality of the product.

FAQ

1. How do I send inquiry?

You can send us inquiry by email: info@yh-clothingacc.com

Call us by phone: 86 13348394030

2. Custom design with logo is ok?

Yes, Most of our orders are customized. So just send us your design in clear pdf, ai,etc file. Our designer will do artwork let you confirm before sampling and production.

3. Can you make other products which is not shown in your website?

Yes, we can. We didn't put all kinds of products in our website, even we are trying to develop new products every time. So just email us what you want and show photos to us, and you will be contacted.

4. Can you offer stock designs ?

Yes, we can. We have thousands of designs for your choice, you can order from our factory then sell in your country, and we will design more and more new designs in future.

5. How many days can we get the custom samples?

Normal 5-7 days, if you are urgent, we can finish within 3 days meet your request.

6. How many days can we get the goods after placing the order.

As usually 7 days within 10,000pcs.

7. Why choose us ?

We have advanced equipments and we are very professional. We can control the quality and finish in short time. Especially for the urgent and big order.

Choose us, choose the real factory is right.

FAQ

1) How can I place order?
A: You can contact us by email about your order details, or place order on line.

2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.

3) What's the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.