ICAO LED Medium Intensity Aviation Obstruction Light UV Protected Polycarbonate

This LED Medium-intensity Aviation Obstruction Light emitting red color, designed for marking top of obstacle which height is more than 45meters.

Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.

Compliance

ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type B / C Obstruction Light

FAA L-864

CAAC MH6012-2015 Aviation obstruction light, MH 5001—2013 Aerodrome technical standards

Features

Electrical

CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp

Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)

Physical

Unique design and UV protected polycarbonate reflector for converging light

UV protection Powder coated bright yellow color base make better visibility

Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection

Special vent installed under base to make sure the air could go through but water is avoid, so that the whole light temperature won’t be high, to avoid the High pressure steam goes inside.

System design

Built-in photocell for day/night operation(dusk to dawn operation)

Surge and lightning protection

GPS devide inside for flashing synchronously

Optional

Dry contact Alarm output for remote monitoring

Other Flashing rate(20, 30, 40, 60, Steady mode)

Infrared LED for pilot using NVG

IOT Monitoring

Application

AH-MI-B2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is 45-105meter, and most time work with low intensity lights installed on the lower place.